Sump Pump Services

Sump Pump Installation in Chicago & Lake County

Keep your basement dry year-round. We size, install, and test submersible, pedestal, and battery-backup sump pump systems — engineered for Chicago storms, high water tables, and power outages.

Iron Wrench plumber preparing for a sump pump installation
fast response icon

Fast Response

Prompt scheduling & service

expert team icon

Expert Team

Licensed, experienced plumbers

24/7 support icon

24/7 Support

Help when storms hit

satisfaction guaranteed icon

Satisfaction Guaranteed

Workmanship you can trust

Why It Matters

What a Sump Pump Does — and Why a Proper Install Matters

A sump pump sits in a pit at the lowest point of your basement or crawl space and moves groundwater away from your foundation before it can flood your floor. In Chicago’s clay soil and high water table, it’s the single most important defense against basement water damage.

But a pump is only as good as its installation. Pit depth, discharge routing, check valves, and backup power all decide whether the system actually keeps you dry during a 2 a.m. storm. We start with the pit and discharge line — checking depth, slope, and where the water really goes.

  • On-site assessment of your basement, water table & drainage
  • Correctly sized pump matched to your water inflow
  • Sealed basin, new check valve & freeze-resistant discharge routing
  • Optional battery or water-powered backup for outages
Plumber installing a basement pump system under a sink
Schedule a Free Estimate
Problems We Solve

Basement Water Problems a Sump Pump Fixes

A basement you can’t trust in a storm is a basement you can’t use. These are the issues homeowners call us about — and each one a properly installed sump pump solves.

What We Install

Sump Pump Systems We Install

From a straightforward pump swap to a full primary-plus-backup system, there’s a setup for every basement and budget. Here’s what we install across Chicago and the north suburbs.

Not Sure Which System Your Home Needs?

Get a free on-site assessment from a licensed Iron Wrench plumber.

Book Your Free Assessment
How It Works

Our Sump Pump Installation Process

A sump pump is your basement’s last line of defense, so we don’t cut corners. Here’s how we take your install from assessment to a dry, tested system.

Iron Wrench plumber preparing tools for a sump pump job
1

Assessment & Quote

We inspect your basement, water table, and current setup, then recommend the right pump and backup with a clear written estimate.

2

Sizing & Selection

We match pump horsepower and backup type to your home’s real inflow — no guesswork, no oversized upsells.

3

Pit Prep & Install

We prep or replace the pit, set the pump, install a new check valve and discharge routing, and add backup power — all to code.

4

Testing & Walkthrough

We run a full test cycle, confirm the discharge flows away from your foundation, and show you how to maintain it.

Why Iron Wrench

Why Homeowners Trust Us With Their Basement

Choosing the right plumber makes all the difference when your basement is on the line. Our certified team brings years of experience, honest pricing, and a customer-first approach to every sump pump install.

  • Licensed & insured Illinois plumbersEvery install is done to local plumbing code and inspection-ready.
  • Right-sized, not over-soldWe recommend the pump your home actually needs — nothing more.
  • Storm-season readyBattery and water-powered backups so you’re covered when the power drops.
  • Clean work & clear walkthroughWe test everything and show you exactly how it works before we leave.
Smiling Iron Wrench plumber giving a thumbs up
Reviews

What Local Homeowners Say

★★★★★

“After two floods we finally called Iron Wrench. They installed a new pump with a battery backup and walked us through everything. Bone-dry through every storm since.”

Megan R.Libertyville · Google Review
★★★★★

“Fast, fair, and clean work. They sized the pump correctly and rerouted the discharge line so it actually drains away from the house. Highly recommend.”

David K.Chicago · Google Review
★★★★★

“Our old pump died during a storm. They came out same day, replaced it, and added a backup so it never happens again. True professionals.”

Sandra P.Mundelein · Google Review
FAQs

Sump Pump Installation Questions, Answered

How much does sump pump installation cost in the Chicago area?

In Chicago and Lake County, sump pump installation cost depends on the pump type (submersible or pedestal), whether you add a battery or water-powered backup, and whether the sump pit or discharge line needs replacement. Every basement is different, so we provide a clear, itemized estimate on-site before any work begins — with no hidden fees or surprise charges.

Do I really need a battery backup sump pump in Illinois?

For homes across Chicago, Lake County, and the north suburbs, we strongly recommend a backup. Severe storms often cut power at the exact moment your pump is needed most. A battery backup or water-powered backup sump pump keeps your basement dry when the primary pump loses power or fails.

How long does sump pump installation take?

A standard sump pump replacement usually takes about 2–4 hours. Installing a new sump pit, replacing a full basin, or adding a battery backup system can take most of a day. We give you an accurate timeline during your on-site assessment.

How often should a sump pump be replaced?

Most sump pumps last 7–10 years. If yours runs constantly, makes unusual noise, short-cycles, or is near the end of its lifespan, it’s smart to replace it before it fails during a heavy Chicago storm.

What size sump pump do I need?

The right sump pump size depends on your basement’s water inflow, pit depth, and how high the water must be pumped (head height). Our licensed plumbers measure these factors during the assessment and size the pump correctly — so you never pay for a bigger unit than your home actually needs.

Do you handle permits and plumbing code compliance?

Yes. Where your village or municipality requires a permit or specific discharge routing, we handle the paperwork and make sure your sump pump installation meets all local Illinois plumbing codes and passes inspection.

Can you install a sump pump where there isn’t one already?

In many cases, yes. We assess your drainage, water table, and foundation, then core a new sump pit and route a proper discharge line away from your home. If a sump pump isn’t the right solution, we’ll tell you honestly and recommend the best fix.

Do you offer emergency sump pump repair and replacement?

Yes. A failed sump pump during a storm is a plumbing emergency. Iron Wrench Plumbing offers fast, same-day sump pump repair and replacement across Chicago and Lake County so your basement doesn’t flood while you wait.

What areas do you serve for sump pump installation?

We install, replace, and service sump pumps throughout Chicago, Lake County, and the surrounding north suburbs — including Mundelein, Libertyville, Vernon Hills, and nearby communities. Call (847) 238-8683 to confirm service in your area.

Protect Your Basement Before the Next Storm

Get a sump pump system sized, installed, and tested by licensed Chicago-area plumbers. Book your free estimate or call us today.